Schneider Electric

ATV320U75N4C

ATV320U75N4C Schneider Electric

The product image shown is for illustration purposes only and may not be an exact representation of the product. Please refer to the item description for accurate information

Please note: Some products are subject to manufacturer minimum pack quantities. We will confirm this at time of order.

Description for ATV320U75N4C Schneider Electric

ATV320U75N4C Schneider Electric - Variable speed drive, Altivar Machine ATV320, 7.5 kW, 380...500 V, 3 phases, compact

Extended Description for ATV320U75N4C Schneider Electric

ATV320U75N4C Schneider Electric - Altivar Machine ATV320 range is an offer of variable speed drives designed for Original Equipment Manufacturers (OEMs).,Its compact form factor allows vertical stacking of drives inside machine frames,It works at a rated power up to 7.5kW / 10hp and a rated voltage from 380V to 500V AC.,Its robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards allows to extend machine availability in harsh environmental conditions, for example at ambient temperatures of up to 60°C without the need of additional cooling.,It incorporates functions suitable for the most common applications, including torque and speed accuracy at very low speed, high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors.,It also incorporates parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors.,It weighs 2.2kg and its dimensions are 150mm wide, 232mm high, 172mm deep.,Altivar Machine ATV320 meets simple and advanced application requirements covered for packaging, material handling, textile, material working, mechanical actuators and hoisting.,It conforms to IEC, UL, TUV, KC and other international standards.,Mounting accessories and external options (braking resistors, line chokes, motor chokes, additional EMC filters) are available with Altivar Machine ATV320 drives. The type of external accessories and options depends on the drive rating.,The product is delivered in two packages.,It is designed to be mounted in vertical position on a panel, thanks to 4 fixing holes.,It is fully integrated inside Schneider Electricâs EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV320 drives directly in SoMachine and SoMove software by means of the same software brick (DTM).

Free Delivery to UK Mainland on orders over £25

Manufacturer New

7 available
1 - 2 w.days
£1,290.42 Exc. VAT
£1,548.50 Inc. VAT

Manufacturer New

Available for Back Order
£1,018.69 Exc. VAT
£1,222.43 Inc. VAT

Manufacturer New

26 available
5 - 8 w.days
£599.79 Exc. VAT
£719.74 Inc. VAT

Direct from Manufacturer

Available on back order
4 - 6 W.Weeks
£431.79 Exc. VAT
£518.14 Inc. VAT

Main

range of product Altivar Machine ATV320
product or component type Variable speed drive
Product specific application Complex machines
Variant Standard version
Format of the drive Compact
mounting mode Wall mount
communication port protocol Modbus serial,CANopen
Option card Communication module, CANopen,Communication module, EtherCAT,Communication module, Profibus DP V1,Communication module, PROFINET,Communication module, Ethernet Powerlink,Communication module, EtherNet/IP,Communication module, DeviceNet
[Us] rated supply voltage 380...500 V - 15...10 %
Nominal output current 17.0 A
Motor power kW 7.5 kW for heavy duty
EMC filter Integrated
IP degree of protection IP20

Complementary

Discrete input number 7
Discrete input type STO safe torque off, 24 V DC, impedance: 1.5 kOhm,DI1...DI6 logic inputs, 24 V DC (30 V),DI5 programmable as pulse input: 0…30 kHz, 24 V DC (30 V)
Discrete input logic Positive logic (source),Negative logic (sink)
Discrete output number 3
Discrete output type Open collector DQ+ 0…1 kHz 30 V DC 100 mA,Open collector DQ- 0…1 kHz 30 V DC 100 mA
Analogue input number 3
Analogue input type AI1 voltage: 0...10 V DC, impedance: 30 kOhm, resolution 10 bits,AI2 bipolar differential voltage: +/- 10 V DC, impedance: 30 kOhm, resolution 10 bits,AI3 current: 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration), impedance: 250 Ohm, resolution 10 bits
Analogue output number 1
Analogue output type Software-configurable current AQ1: 0...20 mA impedance 800 Ohm, resolution 10 bits,Software-configurable voltage AQ1: 0...10 V DC impedance 470 Ohm, resolution 10 bits
Relay output type Configurable relay logic R1A 1 NO electrical durability 100000 cycles,Configurable relay logic R1B 1 NC electrical durability 100000 cycles,Configurable relay logic R1C,Configurable relay logic R2A 1 NO electrical durability 100000 cycles,Configurable relay logic R2C
Maximum switching current Relay output R1A, R1B, R1C on resistive load, cos phi = 1: 3 A at 250 V AC,Relay output R1A, R1B, R1C on resistive load, cos phi = 1: 3 A at 30 V DC,Relay output R1A, R1B, R1C, R2A, R2C on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC,Relay output R1A, R1B, R1C, R2A, R2C on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC,Relay output R2A, R2C on resistive load, cos phi = 1: 5 A at 250 V AC,Relay output R2A, R2C on resistive load, cos phi = 1: 5 A at 30 V DC
Minimum switching current Relay output R1A, R1B, R1C, R2A, R2C: 5 mA at 24 V DC
Method of access Slave CANopen
4 quadrant operation possible True
Asynchronous motor control profile Voltage/frequency ratio, 5 points,Flux vector control without sensor, standard,Voltage/frequency ratio - Energy Saving, quadratic U/f,Flux vector control without sensor - Energy Saving,Voltage/frequency ratio, 2 points
Synchronous motor control profile Vector control without sensor
Transient overtorque 170…200 % of nominal motor torque
Maximum output frequency 0.599 kHz
Acceleration and deceleration ramps Linear,U,S,CUS,Ramp switching,Acceleration/deceleration ramp adaptation,Acceleration/deceleration automatic stop with DC injection
Motor slip compensation Automatic whatever the load,Adjustable 0...300 %,Not available in voltage/frequency ratio (2 or 5 points)
Switching frequency 2...16 kHz adjustable,4...16 kHz with derating factor
Nominal switching frequency 4 kHz
Braking to standstill By DC injection
Brake chopper integrated True
Line current 26.5 A at 380 V (heavy duty),18.7 A at 500 V (heavy duty)
Maximum input current 26.5 A
Maximum output voltage 500 V
Apparent power 16.2 kVA at 500 V (heavy duty)
Network frequency 50...60 Hz
Relative symmetric network frequency tolerance 5 %
Prospective line Isc 22 kA
Base load current at high overload 17.0 A
Power dissipation in W Fan: 229.0 W at 380 V, switching frequency 4 kHz
With safety function Safely Limited Speed (SLS) True
With safety function Safe brake management (SBC/SBT) False
With safety function Safe Operating Stop (SOS) False
With safety function Safe Position (SP) False
With safety function Safe programmable logic False
With safety function Safe Speed Monitor (SSM) False
With safety function Safe Stop 1 (SS1) True
With sft fct Safe Stop 2 (SS2) False
With safety function Safe torque off (STO) True
With safety function Safely Limited Position (SLP) False
With safety function Safe Direction (SDI) False
Protection type Input phase breaks: drive,Overcurrent between output phases and earth: drive,Overheating protection: drive,Short-circuit between motor phases: drive,Thermal protection: drive
Width 150 mm
Height 232.0 mm
Depth 178.0 mm
net weight 3.6 kg

Environment

Operating position Vertical +/- 10 degree
Product certifications CE,ATEX,NOM,GOST,EAC,RCM,KC
marking CE,ATEX,UL,CSA,EAC,RCM
Standards IEC 61800-5-1
Electromagnetic compatibility Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2,Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3,Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4,1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5,Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6,Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
Environmental class (during operation) Class 3C3 according to IEC 60721-3-3,Class 3S2 according to IEC 60721-3-3
Maximum acceleration under shock impact (during operation) 150 m/s² at 11 ms
Maximum acceleration under vibrational stress (during operation) 10 m/s² at 13...200 Hz
Maximum deflection under vibratory load (during operation) 1.5 mm at 2...13 Hz
Permitted relative humidity (during operation) Class 3K5 according to EN 60721-3
Volume of cooling air 60 m3/h
Overvoltage category III
Regulation loop Adjustable PID regulator
Speed accuracy +/- 10 % of nominal slip 0.2 Tn to Tn
Pollution degree 2
Ambient air transport temperature -25…70 °C
Ambient air temperature for operation -10…50 °C without derating,50…60 °C with derating factor
Ambient air temperature for storage -25…70 °C

Packing Units

Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 19.500 cm
Package 1 Width 22.000 cm
Package 1 Length 33.000 cm
Package 1 Weight 4.829 kg
Unit Type of Package 2 S06
Number of Units in Package 2 10
Package 2 Height 75.000 cm
Package 2 Width 60.000 cm
Package 2 Length 80.000 cm
Package 2 Weight 58.000 kg

Contractual warranty

Warranty 18 months

Documentation

Product Datasheet

User guide

Instruction sheet

Catalogue

CAD

Environmental disclosure

Looking for a specific part?

If the product you're searching for isn't listed, click below to submit your enquiry and one of our specialists will source it for you.

CTA image

Contact Us

Using one of the ways below contact us and we will get back to you as soon as possible

Whatsapp
Web Form Phone Email More details